Cool Cable Cardigan

12 commenti

Cool Cable Cardigan

To see a list of all sewing tutorials, click here!

On a recent trip to London I fell in love with a high couture knit jacket. When I came across this beautiful quilted cable knit fabric I decided to make my own variation using the jacket I had seen as inspiration.

Cool Cable Cardigan
Cool Cable Cardigan
Cool Cable Cardigan
Cool Cable Cardigan
Cool Cable Cardigan

Inspiration garment

It is perfect for crisp spring or fall days but also works well in air-conditioned rooms during the summer. A perfect weight to layer easily over other garments, it looks great with jeans, trousers, skirts or as a topper over a dress. I have teamed it up with a matching T-shirt and have been wearing it casually with jeans. I can see that this jacket is going to see a lot of wear!

(For more photos, scroll down to the bottom of the article!)

Fabric

I used 1 1/2 yards of the quilted cable matelasse’ knit in the denim color. (It also comes in seagrass and black. Creamy white and light gray heather will be available soon as well.)  I cut the pattern crosswise to allow the cables on the fabric to run lengthwise. The fabric has enough stretch and seaming so that it is not a problem to use the fabric on the cross grain.

Cool Cable Cardigan

Fabric #66437 #66436, #66435

For the contrasting sections I used 11 oz. rayon jersey in slate blue (now sold out, no longer available—see special note at the bottom of this section), which matched so well that I made a coordinating T-shirt to wear underneath the jacket. In total I used 2.5 yards of the 11 oz. jersey, to complete all the contrast sections plus the T-shirt. If you use a thicker knit for contrast (a ponte for instance), you can skip some of the doubling and interfacing steps described below. You can also make the entire jacket from the cable knit.

Front, upper back, mid back and upper sleeves were cut from the cable knit fabric.  All other pieces were cut from a double layer of rayon jersey. All of the contrast pieces were cut double and interfaced with a bias knit interfacing in black. **Make sure
to choose an interfacing that will not fray as this garment is constructed with all raw edges.** The interfacing added a bit of structure to the thinner 11 oz.
rayon jersey making it more compatible with the thicker cable knit fabric.

SPECIAL NOTE: Please contact us for more information regarding coordinating fabrics for these cable knits. Fabrics are sometimes discontinued but there’s always another option!

Pattern

Cool Cable Cardigan

Style Arc Steffi Jacket

I chose a pattern that was similar to my inspiration garment. The Steffi Jacket from StyleArc was the perfect choice as it had similar seaming and required only a few changes:

1. I redrew the CF into a curved hem and omitted the zipper.

2. I wanted to add a band around the neckline instead of the collar. To do this I cut the jacket using the original pattern. Once the jacket was assembled I draped the
garment on my dress form and marked a new finished neckline. From the finished
neckline, I drafted a 1 1/4” wide band and added seam allowances.

3. I also added a band 1 1/4″ wide to CF. There is no overlap; the bands are intended to just meet at CF. I extended the bands to end at the bottom of the back flounce.

4. I straightened the sleeve hem and add a 1 1/4″ band to match the neck and CF bands.

5. I replaced the lower back panel with a long rectangle that was slashed and spread along the bottom edge to create a more flared back panel. To create the lower back panel I measured the length of the seam and cut a rectangle pattern piece 6” wide. I slashed the
rectangle at CB and then again 5” either side of CB. I spread these three slashes 3” each, which turned my rectangle into more of a U shape. When the U shape is sewn to the lower back edge it creates a flounce.

6. I also added a flat separate band (also 1 1/4″ wide) between the upper and mid back panels. This band was sewn into the seam and left loose. It helps to break up the pattern between the upper and middle back panels.

[Photos of pattern pieces coming soon.]

Layout and Cutting

Cool Cable Cardigan


The pattern was cut on the crosswise grain so the cables would run vertically. Most pieces didn’t require matching since they were separated by a contrast panel. The only pieces that were matched were the upper back, mid back and upper sleeve. I also made sure that both front panels were mirror images of each other. To do so I had to cut them in opposite directions:

Cool Cable Cardigan

Needles, Thread and Notions

3 x polyester Guttermann thread in color 239
1 x Aurifil Cotton Mako 12 weight top stitching thread in Color 1248
Cotton basting thread
5 x Elan silver hook sets approximately 1 1/2” across by 1/2” wide
Ballpoint size 70 machine needles were used in the coverstitch machine
Buttonhole spacing gauge

Fusing

Cool Cable Cardigan

Elna press

Since there was so much fusing for this project, I fused everything using an Elna Press, which gives a very strong bond and covers more area at once, making the job quicker.
Alternatively, an iron can be used.

To create a good bond follow these steps:
1.  Warm the fabric first with the iron.
2.  Position the fusing. Use a lift and press motion rather than a gliding motion to fuse the
interfacing. Holding the iron in one place for approximately 15-18 seconds should create a good bond.
3.  Turn the fabric over to the right side and press again. This will draw the glue into the fabric creating a permanent bond.

Stitching

I used a coverstitch machine to sew all the seams on this garment, but if you don’t have one, this project would be a great opportunity to experiment with decorative stitches in your sewing machine library.
To achieve this seam, I used all 3 needles on the coverstitch machine, and a fancy thread in the looper. The heavier thread in the looper created a stitch that matched the cables of the fabric very well.

Cool Cable Cardigan


The stitching is all done from the wrong side of the garment, so it is essential to baste all seams accurately. The basting is used as a guideline on the wrong side of the garment to help keep stitching straight when you cannot see what is happening on the right side of the garment. Practice the technique first.

I used a maximum stitch length of 4mm and pulled on the fabric slightly as I fed it into the coverstitch machine. The longer stitch length and technique of pulling on the fabric slightly built more give into the stitch, which gave it greater stretch. This was particularly critical in areas that required a lot of stretch such as the neckline and hems of the Tshirt as well as the sleeves of the jacket.

Experiment with decorative stitches in your stitch library using a heavier thread. Depending on the thickness of the thread used, you may need a top stitching needle. Try lengthening stitches to accommodate the thicker thread. Choose stitches which are not too dense.

Seaming

Thread trace stitching lines on all pieces cut from cable knit fabric, as well as inside layer of the contrast pieces.

Cool Cable Cardigan

Lay inner contrast piece over wrong side of cable knit piece, lining up seam lines. Baste 1/8” away (in yellow).

Cool Cable Cardigan
Cool Cable Cardigan


Cut seam allowance off vertical seam of outer contrast layer and lay on top of right side of cable knit, lining up raw edge with original seam line of basting. Baste in place close to raw edge, being very accurate as this will become your sewing guideline. Remove all other basting.

Cool Cable Cardigan
Cool Cable Cardigan

On wrong side, coverstitch seam following the basting thread by positioning it between the first and second needle. This worked well on my coverstitch machine. Practice a sample first on your machine to determine spacing. Remove basting and press.

Cool Cable Cardigan
Cool Cable Cardigan


Wrong side up when coverstitching:

Cool Cable Cardigan


Right side:

Cool Cable Cardigan

On wrong side trim away seam allowance of contrast using applique scissors.

Cool Cable Cardigan

Open up layers of contrast panels and carefully trim away cable knit as close to stitching as possible to reduce bulk.

Cool Cable Cardigan
Cool Cable Cardigan

Most seams are done using this method, exclusive of shoulder seams on neck band and upper and lower under sleeve panel seams, which are lapped separately.

Cut seam allowance off along lower edge of upper under sleeve panel. Lap over lower under sleeve panel. Baste close to raw edge. Coverstitch from wrong side. Do this to both inner and outer contrast under sleeve sections separately.

Cool Cable Cardigan

Bands

Baste both layers of upper back band wrong sides together, along lower seam line. From
wrong side, coverstitch. Trim close to stitching.

Cool Cable Cardigan

Lay underside of upper back band behind upper back panel. Baste. Lay mid back panel along same seam and baste. Serge or zig zag seam down to 1/4” wide.

Cool Cable Cardigan
Cool Cable Cardigan

Trim off seam allowance on upper edge of upper back band.

Cool Cable Cardigan

Trim cable knit seam allowance. Baste band down along seam line. Coverstitch from wrong side, through all layers.

Cool Cable Cardigan
Cool Cable Cardigan

Finished upper back band

Attach front bands using seaming technique described above. Chalk exactly 1 1/8” away from raw edge. Baste along chalk line. Turn to wrong side and coverstitch. From right side trim close to stitching. Be extra careful to cut smoothly since this will remain a raw edge and will be the CF of the jacket.

Cool Cable Cardigan

Lap shoulder seams on neck band. Coverstitch seam. Chalk seam allowance on neck band, and remove coverstitching to within chalk marks. Tie off threads. Attach neck bands using the same technique as the front bands.

Cool Cable Cardigan
Cool Cable Cardigan
Cool Cable Cardigan

Sleeve

The sleeve can be tricky as it has to be turned through a skinny panel in order to achieve this type of seaming. The sleeve is wide enough to accomplish this technique. The stretchy fabric also helps.
One seam on the sleeve is done exactly as all the other seams, but the second seam has to
turn through the contrast panel in order to access the seam and trim the cable knit seam
allowance down. This is done after the second seam of the sleeve has been sewn. The seam can be accessed through the underarm area.

Cool Cable Cardigan

Construction Sequence

1. Assemble body and attach sleeves
2. Attach lower back flounce
3. Attach front bands
4. Attach neck band

Closure

Try on the garment and mark bust on the front band. One closure should sit at the bust to prevent the garment from gaping. Mark the center of the neckband.

Use a metal buttonhole spacing guide to mark 5 closure placements. The spacing guide should align with the neck and bust markings with one more marking between these two and two below the bust.

Cool Cable Cardigan

The closures should be positioned so that the edges of the front band meet but do not overlap when closed.

Cool Cable Cardigan

Chalk the position of each closure.

Cool Cable Cardigan

Use a buttonhole stitch and the same Aurifil thread to attach the closures to the front band. I used 10 buttonhole stitches per closure.

Cool Cable Cardigan
Cool Cable Cardigan 2
Cool Cable Cardigan

T-shirt

Cool Cable Cardigan

I used my favorite basic T-shirt pattern, Ce Podolak’s Material Things Fearless T-shirt #109 to create a coordinate to wear with the jacket.

Cool Cable Cardigan

I sewed the shoulder seams first and then tried the T-shirt on with the jacket to see how the two necklines would sit. I wanted the T-shirt to be exposed and sit slightly higher than the jacket neckline.

To create the same raw edge style that was used on the jacket, cut the neckband with no seam allowance 1 1/8” wide. Lap the raw edges of the neckband over the raw edge of the neckline. Baste close to the raw edges of the band. Coverstitch from the wrong side pulling on the neckband as you stitch.

Cool Cable Cardigan


Attach the sleeves.

Try the garment on and pin the side seams and sleeves to fit. I found the rayon jersey was quite stretchy. Pinning the side seams after the neck and sleeves were finished allowed me to pin the fabric in slightly from the regular stitching line for a closer fit.

Fold the hems of the T-shirt and sleeves to the outside of the garment. By doing so, this
creates a raw edge to match the raw edge finish of the jacket. I left a 1 1/4” hem allowance on the hem of the T-shirt and a 3/4” hem allowance on the sleeve. Baste. Position the basting 1/8” back from the raw edge and aligned this with the first needle on the coverstitch machine.

Cool Cable Cardigan
Cool Cable Cardigan
Cool Cable Cardigan
Cool Cable Cardigan
Cool Cable Cardigan
Cool Cable Cardigan
Cool Cable Cardigan
Post più vecchio Torna a Sewing Tutorials Post più recente

12 commenti

O.M.G. That is so awesome. I’m in love.

Michelle Braga

This is a fantastic tutorial! Thank you for sharing, Kathryn.

Jennifer Marie Shaw

Kathryn,

Your creation, in my opinion, looks better than inspiration jacket. Thank you so much.

Natalya

FABULOUS! As are all your tutorials! I appreciate your creativity, artistry and ability to convey your talents and experience in such wonderful inspiring tutorials. Thank you for your contribution! Now to details: what size did you use for the Steffi SA pattern. Did you find that it was true to size, too large or too small? Always confused about size when ordering SA patterns. Thanks for sharing your experience and talent.

Carol McNeely

Kathryn, this is AMAZING. Your version is much, MUCH better than the inspiration garment! Fantastic garment. I am just in awe.

Rebecca Grace

lascia un commento

Tieni presente che i commenti devono essere approvati prima di essere pubblicati.