Fabric: Modal/Bamboo/Tencel Woven Twill in the Bittersweet colorway
Pattern: Zadie Jumpsuit by Paper Theory
This jumpsuit, I am never taking it off! It is so comfortable yet at the same time looks really put together. I’ve styled it to be a bit more dressy for a friend’s wedding, but will also wear it more casually all summer. The Zadie jumpsuit is such a versatile style and the Modal/Bamboo/Tencel Woven Twill fabric skims the body in a soft and flattering way. With the added touch of french seams, it is a pure pleasure to wear.
Up Close Details Gallery
Fabric Tips & Process
First let’s talk about the fabric. This fabric is wonderful to wear, feels very cool to the touch and is available in a number of colors. The color I chose is this beautiful muted tangerine. With a pattern like this one, sleek and simple with the interesting wrap feature, I find a solid fabric really shows it off best. The only thing you have to watch out for while working with this fabric is the iron: it does not like high heat. I pre-washed my fabric on delicate/cold cycle and put it in the dryer on low for only about 10 minutes and let the fabric air dry after that. Always try washing a scrap of fabric first, especially if you are washing in a different manner than recommended. The manufacturer recommends hand washing and line drying, but I find it really difficult to hand wash and line dry a full length of fabric, and often there are other options! Be sure to test a sample as different detergents and washing machines can have varying results.
Pressing: Use very low heat while ironing. Cover your ironing board with flannel, this will help to prevent making your seams shiny with the iron. Try to press from the wrong side as much as possible, and always use a press cloth on the right side. I found a scrap of the actual fabric worked best.
Alterations: I lengthened the pant by 1.5″ at the hem (I am 5 ft. 5″ and I wanted a slightly longer pant). I shortened the front and back bodice by 1/4″ on shorten lines. I shortened the pant crotch front and back by 1/4″ on shorten lines. And finally, most importantly, I added 1/4″ to all seam allowances. Why? Because this particular pattern has 3/8″ seam allowances but 5/8″ is needed for the french seams.
Layout and Cutting: I found that the pattern fabric requirements were pretty tight, and I know that they were meant to prevent waste, but for me it was really not enough fabric to cut out my size, especially with the extra 1/4″ seam allowance I added. Therefore, if you are doing french seams, you may want more fabric than suggested. I chose to swap the fabric waist ties for grosgrain ribbon. I couldn’t find a good color match, so I dyed it myself! If you choose to use ribbon as I have, remember to cut the ends at the angle the pattern indicates. I like to use trace tacks instead of cutting notches, especially when I am doing french seams, since I don’t want a notch to be cut out of my seam on the inside of the garment. Don’t forget to stay stitch neck edges, as this will save you so much trouble!
Tip: Tear a straight edge along cut edge of fabric, this will help to line up fabric perfectly on grain. Since we don’t want to tear a straight line through the fabric every time we need to rearrange or pull more fabric onto the cutting table, I use my gridded cutting mat, pick a line and line up my yard stick to create a straight line. Pop in a few pins along the line and you now have a straight edge to line up the grain again for the next layout of pattern pieces.
French Seams: I chose to substitute the overlocked seams with french seams, for a cleaner finish. If you choose to do so, don’t forget to add 1/4″ to all your seam allowances! The pattern only includes 3/8″ seam allowances, and it is much easier to do french seams with a wider seam allowance. Start by placing your pieces wrong sides together. Stitch at 3/8″. Press flat. Trim to scant 1/4″. Press the seam open (remember to use a press cloth since you are technically pressing on the right side, even though it doesn’t seem like it yet). Now fold at the seam so that right sides are together, and press. Stitch the seam at 1/4″. I find that a presser foot with a guide makes this process super easy, but it is not necessary. Press flat once more. Now from the right side of the garment, press the seam in one direction, again using your press cloth, and being extra careful not to press the seam through because that is when you will get shine. Work each seam separately from start to finish of the french seam, otherwise the fabric will start to fray and all the little threads will get stuck in the seam and will be a nightmare to pick out.
Pocket: Start by fusing the pocket opening on the wrong side, as this prevents the pocket opening from stretching. I used a lightweight fusible interfacing: I cut it 3/4″ wide, then pinked the edge. Stitch the pocket to the front pant. Trim both layers of the seam to 3/8″, then grade down the pocket seam allowance only. Press and edge-stitch (I chose to edge-stitch the pocket opening, rather than do an under-stitch as the pattern suggests. I found that it created a more crisp edge with this drapey fabric). Now finish the bottom of your pocket with a french seam. Match markings at the waist to create a pleat, pin the pocket in place, and baste. Baste the pocket down on side seam as well.
3 comments
Yes absolutely! There is tons of room to get it on and off easily. The front tie and wrap portion open up with plenty of space.
Can you get it off and on easily?
Oh my goodness, I learned so much about sewing just from this one post. Thank you Malia. The jumpsuit looks gorgeous on you and I love the color. ð